|
|
| • Description |
|
MAC-EDIL has designed the
Hydraulic Lion Pump, a fully hydraulic pump
capable of continuously mixing and pumping
cement mortars (cement, grout and materials
for thermal probes). The Hydraulic Lion Pump
is to be directly connected to the borer by
means of the pipes supplied with the machine.
The Hydraulic Lion Pump is fitted with a low-voltage
electric panel for machine control; a button
positioned on the panel allows rotation to
be reversed, this is intended to easily eliminate
any pipe obstruction and therefore make cleaning
easier. For greater safety, the grille placed
over the material loading hopper has been
provided with four fixing bolts as well as
a grille detecting sensor.
The water pump mounted on the machine is also
hydraulically operated, in order to keep the
water pressure always constant and allow better
blending. |
|
|
|
 |
|
|
| • Technical data |
|
• Dimensions |
|
|
|
| Voltage |
12-24V |
| Flow rate |
15-40 l/m |
| Pumping distance |
40 m |
|
|
| Loading height |
1000 mm |
| Width |
700 mm |
| Length |
1600 mm |
| . |
. |
|
|
|
| • Gallery |
|
|
|
| • Standard equipment |
|
| 12 or 24V control panel |
|
1 pressure discharge valve
with gauge |
| Hydraulic engine |
|
Mt 7 water suction pipe for pump |
| Hydraulic pump |
|
1 standard key case |
| Mt 22 remote control with cable |
|
1 use and maintenance manual |
| Mt 20 35mm Ø grout tube |
|
1 conformity declaration |
|
|
|
